Jpn. J. Appl. Phys. 45 (2006) pp. 4516-4520  |Previous Article| |Next Article|  |Table of Contents|
|Full Text PDF (145K)| |Buy This Article|

Measurement of Temperature Distribution Using Acoustic Reflector Array

Koichi Mizutani, Satoshi Kawabe1, Ikumi Saito and Hiroyuki Masuyama2

Graduate School of Systems and Information Engineering, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
1Graduate School of Science and Engineering, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
2Electronic Mechanical Engineering Department, Toba National College of Maritime Technology, 1-1 Ikegami-cho, Toba, Mie 517-8501, Jaapn

(Received November 30, 2005; accepted March 2, 2006; published online May 25, 2006)

We propose an ultrasonic measurement of temperature distribution. Using the system, we aim to measure temperature distribution to be used for a sophisticated air-conditioning system. The system consists of a loudspeaker (SP), a microphone (MIC) and an acoustic reflector array. Sound velocity is dependent on air temperature along the propagation path, and is measured from the time of flight (TOF) of sound. A measurement area is partitioned into a 1×3 grid. The sound velocities in each partitioned grid square were obtained by arranging the SP, MIC and three reflectors appropriately. We created a temperature gradient in a grid square of the measurement area using an electrical heat source to confirm that the system detects an area of heat concentration. The product of area length (m) and area temperature (°C) corresponds to the amount of heat (m·°C) in that area. The amount of heat measured by the system showed good agreement with the amount of heat estimated using thermocouples, which were installed as reference. The method has the advantages of noncontact sensing, a quicker response and a simpler composition, over conventional temperature measurement systems.

URL: http://jjap.jsap.jp/link?JJAP/45/4516/
DOI: 10.1143/JJAP.45.4516


|Full Text PDF (145K)| |Buy This Article| Citation:


References | Citing Articles (22)

  1. F. Engdahl and D. Johansson: Energy Build. 36 (2004) 205.
  2. G. C. Bakos, E. Tsioliaridou and N. F. Tsagas: Energy Build. 38 (2006) 45.
  3. J.-H. Kang and S.-W. Park: Mechatronics 8 (1998) 459.
  4. W. Munk and C. Wunsch: Deep Sea Res., Part A 26 (1979) 123.
  5. E.-C. Shang and Y.-Y. Wang: Comput. Phys. Commun. 65 (1991) 238[CrossRef].
  6. I. Basarab-Horwath and M. M. Dorozhevets: Proc. IEEE Ultrasonic Symp. Cannes, 1994, p. 1891.
  7. M. Fujii and X. Zhang: Proc. 4th World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Brussels, 1977, p. 169.
  8. K. Mizutani, K. Nishizaki, K. Nagai and K. Harakawa: Jpn. J. Appl. Phys. 36 (1997) 3176[JSAP].
  9. K. Mizutani, A. Funakoshi, K. Nagai and K. Harakawa: Jpn. J. Appl. Phys. 38 (1999) 3131[JSAP].
  10. A. Funakoshi, K. Mizutani, K. Nagai, K. Harakawa and T. Yokoyama: Jpn. J. Appl. Phys. 39 (2000) 3107[JSAP].
  11. K. Ikeda: Jpn. J. Appl. Phys. 40 (2001) 3566[JSAP].
  12. M. Moriya and T. Sugimoto: Jpn. J. Appl. Phys. 41 (2002) 3592[JSAP].
  13. E. Ishikawa and K. Mizutani: Jpn. J. Appl. Phys. 42 (2003) 5372[JSAP].
  14. K. Mizutani, K. Itoga, K. Kudo, L. Okushima and N. Wakatsuki: Jpn. J. Appl. Phys. 43 (2004) 3090[JSAP].
  15. J.-S. Kim and A. Yamada: Jpn. J. Appl. Phys. 41 (2002) 3592[JSAP].
  16. K. Kudo, K. Mizutani, T. Akagami and R. Murayama: Jpn. J. Appl. Phys. 42 (2003) 3189[JSAP].
  17. K. Kudo and K. Mizutani: Jpn. J. Appl. Phys. 43 (2004) 3095[JSAP].
  18. E. J. Evans and E. N. Bazley: Acustica 9 (1956) 238.

|TOP|  |Previous Article| |Next Article|  |Table of Contents| |JJAP Home|
Copyright © 2013 The Japan Society of Applied Physics
Contact Information